VVINSCO / WINSCO METAL
0.4mm 201 2B Stainless Steel Sheet, 4 x 8 ft
A nominal 4 x 8 ft cold-rolled sheet for buyers who need economical grade 201 stainless steel, a smooth 2B mill finish and a light 0.4mm gauge for indoor fabrication.
201Featured grade
0.4mmFeatured thickness
4 x 8 ftNominal format
2BMill finish
Buyer Summary
The featured sheet is grade 201, 0.4mm thick and approximately 1220 x 2440mm, commonly described as a nominal 4 x 8 ft sheet. It is intended for indoor panels, covers, cabinets and general metal fabrication where a cost-effective stainless material is required.
Dimension note: 4 x 8 ft converts to 1219.2 x 2438.4mm. Commercial descriptions may also use 1219 x 2438mm or 1220 x 2440mm. State the exact finished dimensions and tolerance on the enquiry and purchase order.
Product Specifications
| Product |
Cold-rolled 2B stainless steel sheet / inox sheet |
| Featured grade |
SS 201 |
| Other available grades |
SS 304, 304L, 316 and 316L, subject to order confirmation |
| Featured size |
Nominal 4 x 8 ft; specify 1219 x 2438mm or 1220 x 2440mm and the required tolerance |
| Other regular sizes |
1000 x 2000mm; 1219 x 3048mm (4 x 10 ft); 1250 x 2500mm; 1500 x 3000mm; 1500 x 6000mm |
| Featured thickness |
0.4mm |
| Available thickness |
0.3-3.0mm, subject to grade, width and production confirmation |
| Surface |
2B cold-rolled mill finish |
| Processing |
Cut-to-size, slitting, bending and protective film options upon request |
| Inspection |
Grade, thickness, dimensions, surface, quantity and packing checked against the confirmed order |
Why Buyers Choose This Format
- Common fabrication size: the nominal 4 x 8 ft format works with many workshop layouts and panel designs.
- Economical grade: 201 is a practical option for many indoor, non-aggressive environments.
- Light-gauge material: 0.4mm helps reduce component weight for appropriate applications.
- Clean 2B surface: suitable for mill-finish use or subsequent fabrication and finishing.
- Order clarity: exact metric dimensions, thickness tolerance, film and packing are confirmed before production.
Typical Applications
Indoor equipment covers, cabinets, appliance components, wall liners, door parts, skirting, display panels and general sheet-metal fabrication. The selected grade and thickness must meet the required strength, forming and corrosion conditions.
Quality Control Before Shipment
- Verify the ordered material grade and identification.
- Measure thickness and exact metric sheet dimensions.
- Inspect the 2B surface and edges.
- Confirm protective film, sheet count, labels and packing.
- Match shipment documents to the approved order details.
Frequently Asked Questions
Should I order 1219 x 2438mm or 1220 x 2440mm?
Use the exact metric size required by your drawing and nesting plan. Do not rely only on the phrase 4 x 8 ft.
Is grade 201 a replacement for grade 304?
Not automatically. The grades differ in composition, corrosion behavior and application suitability. Select the grade from the project environment and specification.
Can 0.4mm sheet be welded?
Thin sheet can be welded with suitable equipment, parameters and operator skill, but distortion and burn-through must be controlled. Trial fabrication is recommended.
Can VVINSCO cut blanks from the sheet?
Cut-to-size can be reviewed. Send the drawing, required tolerance, edge condition, quantity and nesting preference.
Request an Accurate Quotation
Send: grade, exact metric size, thickness and tolerance, 2B finish, protective film, processing drawing, quantity, packing requirement and destination port.
Final specifications are governed by the approved quotation, sample, drawing, purchase order and applicable standard.
Your message must be between 20-3,000 characters!
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews