600 Grit Polished 304 Stainless Steel Rectangular Tube, 6m Length | VVINSCO
Product Overview
VV VVINSCO • WINSCO METAL decorative stainless steel tube featuring a fine 600-grit polished surface. Six-metre decorative rectangular tubing ideal for railings, partitions, door frames, furniture and commercial interiors. Custom sizes, wall thicknesses, cutting and fabrication available for project orders.
600-Grit Polished • AISI 304 • 0.3-3.0mm Wall • 6m Standard Length • Custom Sizes
Understanding Product Specifications
"600G C-304 × 6 Metres" refers to a fine 600-grit polished surface, C-304 refers to grade 304 stainless steel, and 6 metres is the tube length. The number 600 is not the tube diameter. The rectangular width, height and wall thickness must be selected separately from the project drawing.
For an accurate quotation: send the rectangular size, wall thickness, grade, 600G surface reference, length, quantity, tolerance, processing requirement and destination port.
Fine-Polished Rectangular Tube for Decorative Fabrication
Confirm the tube dimensions and approved surface sample before production.
Product Specifications
| Product |
TIG-welded decorative stainless steel rectangular tube / stainless steel flat tube |
| Primary Grade |
AISI 304 / 304L |
| Alternative Grades |
AISI 201 and 316/316L, subject to size, wall thickness, finish and order quantity |
| Featured Surface |
600-grit fine polished finish |
| Other Surface Options |
2B, BA, No.4, brushed, hairline and mirror by agreement |
| Wall Thickness |
0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 2.75mm and 3.0mm |
| Standard Length |
6m; 1m, 2.5m, 3m, 5.85m, 6.1m, 7m and custom cut lengths by agreement |
| Reference Standard |
ASTM A554; additional project requirements should be confirmed before production |
| Processing |
Cutting, drilling, laser cutting, bending review, welding, polishing and end finishing |
| Typical Applications |
Railings, balustrades, partitions, door frames, furniture, shopfitting and decorative architectural fabrication |
Important: not every size is available in every grade, wall or finish. Confirm dimensional tolerances, corner radius, weld-bead condition and surface direction with the quotation.
Common Rectangular Tube Sizes
5×10
5×20
5×25
5×30
5×40
5×50
10×20
10×30
10×40
10×50
10×60
10×80
12×24
13×25
15×20
15×25
15×30
15×40
15×50
15×60
18×36
19×38
20×30
20×40
20×50
20×60
20×80
25×38
25×50
25×60
30×40
30×50
30×60
30×70
40×60
40×80
40×100
50×70
50×100
60×80
60×100
80×120
100×120
100×150
80×160
80×180
100×200
150×300
Dimensions are shown in millimetres. This is a capability reference; current tooling, MOQ and producible wall thickness must be confirmed for each requested size.
Surface Finish Comparison
600-Grit Polished: Fine abrasive-polished surface with a smoother, brighter appearance than coarser brushed finishes. Grain and gloss should be confirmed by sample.
No.4 / Brushed: Visible directional grain with lower reflectivity, often selected where handling marks should be less noticeable.
8K Mirror: Highly reflective decorative surface produced through a different polishing process. Do not substitute it for 600G without approval.
Use an approved physical sample to control gloss, grain direction and batch appearance.
Wall Thickness Selection Guide
0.3 - 0.7mm: Light decorative trim and low-load interior fabrication where reduced weight and formability are priorities.
0.8 - 1.5mm: Furniture, partitions, displays, door frames and general decorative architectural components.
2.0 - 3.0mm: Components needing greater local rigidity or more material for drilling, welding and joint preparation.
These are purchasing guidelines, not structural ratings. Span, supports, anchors, joints, welds and design loads must be evaluated for load-bearing applications.
Stainless Steel Grade Selection
Grade 201: Economical choice for dry indoor decoration and furniture with limited moisture or chloride exposure.
Grade 304: Featured grade for general architectural decoration, railings, frames, furniture and frequently cleaned interiors.
Grade 316: Preferred for coastal, humid or chloride-exposed environments where enhanced corrosion resistance is required.
Product & Surface Gallery
Fine-polished decorative surface.
Rectangular profile and surface reference.
Confirm size, wall, length and finish before production.
Suitable for custom architectural fabrication.
Typical Applications
Railings & Balustrades: Posts, frames, infill and decorative components when the complete system is engineered for the required load.
Partitions & Door Frames: Interior screens, entrance frames, decorative dividers and commercial space detailing.
Furniture & Shopfitting: Tables, shelving, cabinets, display frames, retail fixtures and hotel furniture.
Custom Production Services
Processing Services
- Cut to specified length
- Drilling and laser cutting
- Bending feasibility review
- Welding and frame fabrication
- Polishing and end finishing
Pre-Shipment Checks
- Grade checked to order requirement
- External dimension and wall checks
- Length, straightness and quantity checks
- Surface, grain and visible weld inspection
- Labels checked against packing list
Surface Protection
Protective film or individual plastic sleeves can be selected to reduce handling damage during packing, transport and installation.
Export Packing
Bundles, protective board, woven wrapping, wooden cases or reinforced frames can be arranged according to surface and unloading method.
Why Choose VVINSCO
23+ Years of Manufacturing Experience: Production and export experience for decorative stainless steel tube and customized metalwork.
Finish + Fabrication Coordination: The tube surface can be coordinated with cutting, drilling, welding and project packing requirements.
Order-Based Inspection: Grade, dimensions, wall, length, surface, quantity and labels are checked against approved requirements.
Frequently Asked Questions
Does "600" mean the tube size?
No. It refers to the 600-grit surface-polishing specification. The rectangular width, height and wall thickness must be stated separately.
Is 600G the same as an 8K mirror finish?
No. A 600-grit polished surface and an 8K mirror surface use different finishing targets. Approve a physical sample when gloss and grain are important.
Can VVINSCO supply 6-metre lengths?
Yes. The featured standard length is 6m. Other standard or custom-cut lengths can be quoted according to the project specification.
Can the tube be cut, drilled, bent or welded?
Yes. Send a drawing so VVINSCO can review cutting, drilling, laser cutting, bending, welding, polishing and surface protection requirements.
What should be included in an RFQ?
State size, wall, grade, finish, length, quantity, tolerance, corner requirement, weld-bead condition, processing, packing, documents and destination port.
Request a Project Quotation
Send VVINSCO your tube schedule or drawing. We will review the producible size, wall, 600G finish, fabrication and packing requirements before preparing the quotation.
1. Size
2. Wall
3. Grade
4. 600G Finish
5. Length
6. Quantity
7. Processing
8. Destination
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews